Cyber-Physical Versus Immersive Learning in Vocational Education: Perceived Support for Creative Thinking and Problem Solving Toward SDG 4

Authors

  • Reza Rahmadian State University of Surabaya Author
  • Ekohariadi Ekohariadi State University of Surabaya Author
  • Ratna Suhartini State University of Surabaya Author
  • Mafrur Udhif Nofaizzi State University of Surabaya Author

DOI:

https://doi.org/10.63230/jocsis.3.4.341

Keywords:

Creative Thinking, Cyber-Physical Learning, Immersive Learning, Problem Solving, Vocational Higher Education

Abstract

Objective: To compare vocational higher education students’ perceived support from Cyber-Physical Learning (CPL) and Immersive Learning (ILM) for creative thinking and problem solving. It examines whether students’ evaluations differ across the two competencies and considers the implications for competency-sensitive learning design relevant to Sustainable Development Goal 4 (SDG 4) on Quality Education. Method: A cross-sectional survey involved 223 applied bachelor students, comprising 109 Electrical Engineering and 114 Informatics Management students. Data were collected using a 31-item questionnaire with a five-point Likert response scale covering four perceived-support constructs: CPL-CT, ILM-CT, CPL-PS, and ILM-PS. Two Wilcoxon comparisons examined differences between the learning environments for each competency. Results: For creative thinking, the reported construct values for CPL (3.9725) and ILM (3.9654) did not differ significantly (Z=−0.322, p=0.747). For problem solving, CPL received a higher reported value (4.0701) than ILM (3.9753), with a statistically significant difference (Z=−3.994, p<0.001). These findings indicate competency-specific differences in students’ perceived instructional support rather than demonstrated improvements in learning performance. Novelty: To provide a direct competency-specific comparison of cyber-physical and immersive learning environments. The findings strengthen a competency–technology alignment perspective by showing that students’ perceptions of instructional support vary according to the targeted competency. This perspective is relevant to SDG 4 because quality vocational education requires learning environments to be selected in relation to instructional objectives and competency requirements rather than technological sophistication alone. The study does not, however, measure progress toward an SDG indicator or establish the causal effectiveness of either learning environment.

References

Cabrera-Duffaut, A., Pinto-Llorente, A. M., & Iglesias-Rodríguez, A. (2024). Immersive learning platforms: Analyzing virtual reality contribution to competence development in higher education-A systematic literature review. Frontiers in Education, 9, 1391560. https://doi.org/10.3389/feduc.2024.1391560

Chauliac, M., Willems, J., Gijbels, D., & Donche, V. (2023). The prevalence of careless response behaviour and its consequences on data quality in self-report questionnaires on student learning. Frontiers in Education, 8, 1197324. https://doi.org/10.3389/feduc.2023.1197324

Chelini, J., & Richert, D. (2023). Teaching engineering design for Industry 4.0 using a cyber-physical learning factory. IFAC-PapersOnLine, 56(2), 4699–4704. https://doi.org/10.1016/j.ifacol.2023.10.994

Çoban, M., Bolat, Y. I., & Göksu, İ. (2022). The potential of immersive virtual reality to enhance learning: A meta-analysis. Educational Research Review, 36, 100452. https://doi.org/10.1016/j.edurev.2022.100452

Delcker, J. (2023). Digitalisation in the curricula of vocational schools: Text mining as an instrument of curricula analysis. Technology, Knowledge and Learning, 28, 999–1014. https://doi.org/10.1007/s10758-022-09591-0

Fett, M., Wilking, F., Goetz, S., & Wartzack, S. (2023). A literature review on the development and creation of digital twins, cyber-physical systems, and product-service systems. Sensors, 23(24), 9786. https://doi.org/10.3390/s23249786

Flora, D. B. (2020). Your coefficient alpha is probably wrong, but which coefficient omega is right? A tutorial on using R to obtain better reliability estimates. Advances in Methods and Practices in Psychological Science, 3(4), 484–501. https://doi.org/10.1177/2515245920951747

Goodboy, A. K., & Martin, M. M. (2020). Omega over alpha for reliability estimation of unidimensional communication measures. Annals of the International Communication Association, 44(4), 422–439. https://doi.org/10.1080/23808985.2020.1846135

Green, S. B., & Yang, Y. (2015). Evaluation of dimensionality in the assessment of internal consistency reliability: Coefficient alpha and omega coefficients. Educational Measurement: Issues and Practice, 34(4), 14–20. https://doi.org/10.1111/emip.12100

Hayes, A. F., & Coutts, J. J. (2020). Use omega rather than Cronbach’s alpha for estimating reliability. But… Communication Methods and Measures, 14(1), 1–24. https://doi.org/10.1080/19312458.2020.1718629

Hong, S., Eom, T., & Moon, J. (2025). Virtual reality simulation to foster authentic learning in pre-service teacher education: A systematic literature review. Educational Research Review, 49, 100743. https://doi.org/10.1016/j.edurev.2025.100743

Howard, M. C., Gutworth, M. B., & Jacobs, R. R. (2021). A meta-analysis of virtual reality training programs. Computers in Human Behavior, 121, 106808. https://doi.org/10.1016/j.chb.2021.106808

Jonassen, D. H. (2000). Toward a design theory of problem solving. Educational Technology Research and Development, 48(4), 63–85. https://doi.org/10.1007/BF02300500

Karanam, S. A. K., & Hartman, N. W. (2025). A systematic review of digital twin (DT) and Virtual Learning Environments (VLE) for smart manufacturing education. Manufacturing Letters, 44(Suppl.), 1597–1608. https://doi.org/10.1016/j.mfglet.2025.06.179

Kerby, D. S. (2014). The simple difference formula: An approach to teaching nonparametric correlation. Comprehensive Psychology, 3, 11.IT.3.1. https://doi.org/10.2466/11.IT.3.1

Lee, J., Bagheri, B., & Kao, H.-A. (2015). A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manufacturing Letters, 3, 18–23. https://doi.org/10.1016/j.mfglet.2014.12.001

Lin, X., Li, R., Chen, Z., & Xiong, J. (2024). Design strategies for VR science and education games from an embodied cognition perspective: A literature-based meta-analysis. Frontiers in Psychology, 14, 1292110. https://doi.org/10.3389/fpsyg.2023.1292110

Liu, Y., Zhan, Q., & Zhao, W. (2024). A systematic review of VR/AR applications in vocational education: Models, affects, and performances. Interactive Learning Environments, 32(10), 6375–6392. https://doi.org/10.1080/10494820.2023.2263043

Makransky, G., & Petersen, G. B. (2021). The Cognitive Affective Model of Immersive Learning (CAMIL): A theoretical research-based model of learning in immersive virtual reality. Educational Psychology Review, 33(3), 937–958. https://doi.org/10.1007/s10648-020-09586-2

Martínez-Abad, F., & León, J. (2023). Causal inference in educational research: Causal analysis in cross-sectional observational studies. RELIEVE, 29(2). https://doi.org/10.30827/relieve.v29i2.26843

Memmedova, K., & Ertuna, B. (2024). Development of a fuzzy Likert scales to measure variables in social sciences. Information Sciences, 654, 119792. https://doi.org/10.1016/j.ins.2023.119792

Merkel, L., Atug, J., Merhar, L., Schultz, C., Braunreuther, S., & Reinhart, G. (2017). Teaching smart production: An insight into the learning factory for cyber-physical production systems (LVP). Procedia Manufacturing, 9, 269–274. https://doi.org/10.1016/j.promfg.2017.04.034

Mäkiö, E., Azmat, F., Ahmad, B., Harrison, R., & Colombo, A. W. (2022). T-CHAT educational framework for teaching cyber-physical system engineering. European Journal of Engineering Education, 47(4), 606–635. https://doi.org/10.1080/03043797.2021.2008879

Pajpach, M., Pribiš, R., Drahoš, P., Kučera, E., & Haffner, O. (2025). Methodology and pilot implementation of modular educational-development platform for interoperable digital twin. Scientific Reports, 15, 28020. https://doi.org/10.1038/s41598-025-13579-y

Pargmann, J., Riebenbauer, E., Flick-Holtsch, D., & Berding, F. (2023). Digitalisation in accounting: A systematic literature review of activities and implications for competences. Empirical Research in Vocational Education and Training, 15, 1. https://doi.org/10.1186/s40461-023-00141-1

Philip, M. (2024). Questionnaire, rating scale and checklist—How do they differ? Methods in Psychology, 10, 100145. https://doi.org/10.1016/j.metip.2024.100145

Plucker, J. A., Beghetto, R. A., & Dow, G. T. (2004). Why isn’t creativity more important to educational psychologists? Potentials, pitfalls, and future directions in creativity research. Educational Psychologist, 39(2), 83–96. https://doi.org/10.1207/S15326985EP3902_1

Podsakoff, P. M., MacKenzie, S. B., & Podsakoff, N. P. (2012). Sources of method bias in social science research and recommendations on how to control it. Annual Review of Psychology, 63, 539–569. https://doi.org/10.1146/annurev-psych-120710-100452

Podsakoff, P. M., Podsakoff, N. P., Williams, L. J., Huang, C., & Yang, J. (2024). Common method bias: It’s bad, it’s complex, it’s widespread, and it’s not easy to fix. Annual Review of Organizational Psychology and Organizational Behavior, 11, 17–61. https://doi.org/10.1146/annurev-orgpsych-110721-040030

Quintero, W. R., & Maldonado, J. E. N. (2024). Competencies of the engineer in Industry 4.0 context: A systematic literature review. Production, 34, e20230051. https://doi.org/10.1590/0103-6513.20230051

Radianti, J., Majchrzak, T. A., Fromm, J., & Wohlgenannt, I. (2020). A systematic review of immersive virtual reality applications for higher education: Design elements, lessons learned, and research agenda. Computers & Education, 147, 103778. https://doi.org/10.1016/j.compedu.2019.103778

Ranganathan, P., & Caduff, C. (2023). Designing and validating a research questionnaire—Part 1. Perspectives in Clinical Research, 14(3), 152–155. https://doi.org/10.4103/picr.picr_140_23

Ranganathan, P., Caduff, C., & Frampton, C. M. A. (2024). Designing and validating a research questionnaire—Part 2. Perspectives in Clinical Research, 15(1), 42–45. https://doi.org/10.4103/picr.picr_318_23

Rienties, B., Divjak, B., Iniesto, F., Pažur Aničić, K., & Žižak, M. (2023). Online work-based learning: A systematic literature review. International Review of Education, 69, 551–570. https://doi.org/10.1007/s11159-023-10008-y

Roll, M., & Ifenthaler, D. (2021a). Learning Factories 4.0 in technical vocational schools: Can they foster competence development? Empirical Research in Vocational Education and Training, 13, 20. https://doi.org/10.1186/s40461-021-00124-0

Roll, M. J. J., & Ifenthaler, D. (2021b). Multidisciplinary digital competencies of pre-service vocational teachers. Empirical Research in Vocational Education and Training, 13, 7. https://doi.org/10.1186/s40461-021-00112-4

Saniuk, S., Caganova, D., & Saniuk, A. (2023). Knowledge and skills of industrial employees and managerial staff for the Industry 4.0 implementation. Mobile Networks and Applications, 28, 220–230. https://doi.org/10.1007/s11036-021-01788-4

Santilli, T., Ceccacci, S., Mengoni, M., & Giaconi, C. (2025). Virtual vs. traditional learning in higher education: A systematic review of comparative studies. Computers & Education, 227, 105214. https://doi.org/10.1016/j.compedu.2024.105214

Shi, Y., & Bangpan, M. (2022). Young people’s participation experiences of technical and vocational education and training interventions in low- and middle-income countries: A systematic review of qualitative evidence. Empirical Research in Vocational Education and Training, 14, 8. https://doi.org/10.1186/s40461-022-00136-4

Sitzmann, T., Ely, K., Brown, K. G., & Bauer, K. N. (2010). Self-assessment of knowledge: A cognitive learning or affective measure? Academy of Management Learning & Education, 9(2), 169–191. https://doi.org/10.5465/amle.9.2.zqr169

Stefana, A., Damiani, S., Granziol, U., Provenzani, U., Solmi, M., Youngstrom, E. A., & Fusar-Poli, P. (2025). Psychological, psychiatric, and behavioral sciences measurement scales: Best practice guidelines for their development and validation. Frontiers in Psychology, 15, 1494261. https://doi.org/10.3389/fpsyg.2024.1494261

Stracke, C. M., Bothe, P., Adler, S., Heller, E. S., Deuchler, J., Pomino, J., & Wölfel, M. (2025). Immersive virtual reality in higher education: A systematic review of the scientific literature. Virtual Reality, 29, 64. https://doi.org/10.1007/s10055-025-01136-x

Wang, Y., Liu, W., Yu, X., Li, B., & Wang, Q. (2024). The impact of virtual technology on students’ creativity: A meta-analysis. Computers & Education, 215, 105044. https://doi.org/10.1016/j.compedu.2024.105044

Wilcoxon, F. (1945). Individual comparisons by ranking methods. Biometrics Bulletin, 1(6), 80–83. https://doi.org/10.2307/3001968

Yu, H., & Wang, J. (2025). Enhancing college students’ creativity through virtual reality technology: A systematic literature review. Humanities and Social Sciences Communications, 12, 693. https://doi.org/10.1057/s41599-025-05044-y

Zhan, Z., He, L., & Zhong, X. (2024). How does problem-solving pedagogy affect creativity? A meta-analysis of empirical studies. Frontiers in Psychology, 15, 1287082. https://doi.org/10.3389/fpsyg.2024.1287082.

Published

2027-12-27

Issue

Section

Articles

How to Cite

Rahmadian, R., Ekohariadi, E., Suhartini, R., & Nofaizzi, M. U. . (2027). Cyber-Physical Versus Immersive Learning in Vocational Education: Perceived Support for Creative Thinking and Problem Solving Toward SDG 4. Journal of Current Studies in SDGs, 3(4), 341. https://doi.org/10.63230/jocsis.3.4.341