Cross-Disciplinary Perceptions of Cyber-Physical and Immersive Learning in Vocational Higher Education: Implications for SDG 4

Authors

  • Reza Rahmadian State University of Surabaya Author
  • Ekohariadi Ekohariadi State University of Surabaya Author
  • Ratna Suhartini State University of Surabaya Author
  • Mafrur Udhif Nofaizzi State University of Surabaya Author

DOI:

https://doi.org/10.63230/jocsis.3.4.342

Keywords:

vocational higher education, cyber-physical learning, immersive learning, disciplinary orientation, creative thinking and problem solving

Abstract

Objective: To examine whether disciplinary affiliation differentiates vocational students’ perceptions of Cyber-Physical Learning (CPL) and Immersive Learning (ILM) support for creative thinking and problem solving. It further considered the findings within a hardware–software convergence framework and their implications for competency-centered vocational education relevant to Sustainable Development Goal 4 (SDG 4). Method: A quantitative, comparative, cross-sectional survey was conducted using purposive sampling at Universitas Negeri Surabaya. The analysis included 222 valid respondents, comprising 109 Electrical Engineering and 113 Informatics Management students. A 31-item questionnaire using a five-point Likert scale assessed four perceived-support constructs: CPL for creative thinking (CPL-CT), CPL for problem solving (CPL-PS), ILM for creative thinking (ILM-CT), and ILM for problem solving (ILM-PS). Four independent-group Mann-Whitney U tests compared the two programs, supplemented by approximate standardized rank-test indicators derived from the reported Z statistics. Results: No statistically significant between-program differences were detected for CPL-CT (p = .663), CPL-PS (p = .585), ILM-CT (p = .636), or ILM_PS (p = .689). The derived standardized indicators were numerically small (r= .027–.037). These findings concern perceived learning support rather than demonstrated learning gains and do not establish practical equivalence or verify the proposed hardware–software convergence mechanism. Novelty: The study provides a cross-disciplinary assessment of four perceived learning affordances rather than comparing the superiority of particular technologies. The findings support consideration of competency-centered access to cyber-physical and immersive learning across vocational programs, with relevance to SDG 4. However, the study does not directly measure SDG attainment, actual skill development, or causal learning effects.

References

Aboderin, O. S., & Havenga, M. (2024). Essential skills and strategies in higher education for the fourth industrial revolution: A systematic literature review. South African Journal of Higher Education, 38(2). https://doi.org/10.20853/38-2-5430

Amores-Valencia, A., Burgos, D., & Branch-Bedoya, J. W. (2022). Influence of motivation and academic performance in the use of augmented reality in education: A systematic review. Frontiers in Psychology, 13, 1011409. https://doi.org/10.3389/fpsyg.2022.1011409

Bailenson, J. N., DeVeaux, C., Han, E., Markowitz, D. M., Santoso, M., & Wang, P. (2025). Five canonical findings from 30 years of psychological experimentation in virtual reality. Nature Human Behaviour, 9, 1328–1338. https://doi.org/10.1038/s41562-025-02216-3

Chakraborty, S., Gonzalez-Triana, Y., Mendoza, J., & Galatro, D. (2023). Insights on mapping Industry 4.0 and Education 4.0. Frontiers in Education, 8, 1150190. https://doi.org/10.3389/feduc.2023.1150190

Chelini, J., & Richert, D. (2023). Teaching engineering design for Industry 4.0 using a cyber-physical learning factory. IFAC-PapersOnLine, 56(2), 4699–4704. https://doi.org/10.1016/j.ifacol.2023.10.994

Coban, M., Bolat, Y. I., & Goksu, I. (2022). The potential of immersive virtual reality to enhance learning: A meta-analysis. Educational Research Review, 36, 100452. https://doi.org/10.1016/j.edurev.2022.100452

De Souza, A. S. C., & Debs, L. (2024). Concepts, innovative technologies, learning approaches and trend topics in Education 4.0: A scoping literature review. Social Sciences & Humanities Open, 9, 100902. https://doi.org/10.1016/j.ssaho.2024.100902

Di Natale, A. F., Repetto, C., Riva, G., & Villani, D. (2020). Immersive virtual reality in K–12 and higher education: A 10-year systematic review of empirical research. British Journal of Educational Technology, 51(6), 2006–2033. https://doi.org/10.1111/bjet.13030

Doboviček, S., Krulčić, E., Pavletić, D., & Godina, R. (2025). A scalable learning factory concept for interdisciplinary engineering education: Insights from a case implementation. Education Sciences, 15(12), 1574. https://doi.org/10.3390/educsci15121574

Dunmoye, I. D., Smith, L. T., Brown, J. S., Martin, J. P., May, D., & Hunsu, N. (2026). A systematic review on the use of collaborative virtual reality in engineering education. Virtual Reality, 30, 31. https://doi.org/10.1007/s10055-025-01280-4

Hart, A. (2001). Mann-Whitney test is not just a test of medians: Differences in spread can be important. BMJ, 323, 391. https://doi.org/10.1136/bmj.323.7309.391

Kotecha, M. C., & Dandridge, T. M., & Reid Smith, T. (2025, June), Digital Twins in Engineering and Design Education: A Systematized Review. 2025 ASEE Annual Conference & Exposition , Montreal, Quebec, Canada.

Kurnia, R., Syafar, A. M., & Oyovwi, E. O. (2026). Integrating digital skills in technical and vocational education: A systematic review in the context of Industry 4.0. Journal of Vocational, Informatics and Computer Education, 4(2), 106–120. https://doi.org/10.66053/voice.v4i2.475

Lagorio, A., & Cimini, C. (2024). Towards 5.0 skills acquisition for students in industrial engineering: The role of learning factories. Procedia Computer Science, 232, 317–326. https://doi.org/10.1016/j.procs.2024.01.031

Lakens, D. (2017). Equivalence tests: A practical primer for t tests, correlations, and meta-analyses. Social Psychological and Personality Science, 8(4), 355–362. https://doi.org/10.1177/1948550617697177

Lakens, D., McLatchie, N., Isager, P. M., Scheel, A. M., & Dienes, Z. (2020). Improving inferences about null effects with Bayes factors and equivalence tests. The Journals of Gerontology: Series B, 75(1), 45–57. https://doi.org/10.1093/geronb/gby065

Li, J., & Liang, W. (2024). Effectiveness of virtual laboratory in engineering education: A meta-analysis. PLOS ONE, 19(12), e0316269. https://doi.org/10.1371/journal.pone.0316269

McNeish, D. (2018). Thanks coefficient alpha, we'll take it from here. Psychological Methods, 23(3), 412–433. https://doi.org/10.1037/met0000144

Merchant, Z., Goetz, E. T., Cifuentes, L., Keeney-Kennicutt, W., & Davis, T. J. (2014). Effectiveness of virtual reality-based instruction on students' learning outcomes in K–12 and higher education: A meta-analysis. Computers & Education, 70, 29–40. https://doi.org/10.1016/j.compedu.2013.07.033

Mukul, E., & Büyüközkan, G. (2023). Digital transformation in education: A systematic review of Education 4.0. Technological Forecasting and Social Change, 194, 122664. https://doi.org/10.1016/j.techfore.2023.122664

Muzata, A. R., Singh, G., Stepanov, M. S., & Musonda, I. (2024). Immersive learning: A systematic literature review on transforming engineering education through virtual reality. Virtual Worlds, 3(4), 480–505. https://doi.org/10.3390/virtualworlds3040026

Nurjanah, I., Ana, A., & Masek, A. (2022). Systematic literature review: Work readiness of vocational high school graduates in facing the industrial 4.0 era. Jurnal Pendidikan Teknologi dan Kejuruan, 28(2), 139–153. https://doi.org/10.21831/jptk.v28i2.48552

Pawel, S., Heyard, R., Micheloud, C., & Held, L. (2024). Replication of null results: Absence of evidence or evidence of absence? eLife, 12, RP92311. https://doi.org/10.7554/eLife.92311

Perini, M., Tommasi, F., & Sartori, R. (2022). Quali competenze e quali strategie formative per l’industria 4.0? Lo stato dell’arte. QWERTY - Interdisciplinary Journal of Technology, Culture and Education, 17(1). https://doi.org/10.30557/QW000039

Petersen, G. B., Petkakis, G., & Makransky, G. (2022). A study of how immersion and interactivity drive VR learning. Computers & Education, 179, 104429. https://doi.org/10.1016/j.compedu.2021.104429

Radianti, J., Majchrzak, T. A., Fromm, J., & Wohlgenannt, I. (2020). A systematic review of immersive virtual reality applications for higher education: Design elements, lessons learned, and research agenda. Computers & Education, 147, 103778. https://doi.org/10.1016/j.compedu.2019.103778

Rebello, C. M., Deiró, G. F., Knuutila, H. K., de Souza Moreira, L. C., & Nogueira, I. B. R. (2024). Augmented reality for chemical engineering education. Education for Chemical Engineers, 47, 30–44. https://doi.org/10.1016/j.ece.2024.04.001

Roll, M., & Ifenthaler, D. (2021). Learning Factories 4.0 in technical vocational schools: Can they foster competence development? Empirical Research in Vocational Education and Training, 13, 20. https://doi.org/10.1186/s40461-021-00124-0

Sakr, A., & Abdullah, T. (2024). Virtual, augmented reality and learning analytics impact on learners, and educators: A systematic review. Education and Information Technologies, 29, 19913–19962. https://doi.org/10.1007/s10639-024-12602-5

Silseth, K., Steier, R., & Arnseth, H. C. (2024). Exploring students’ immersive VR experiences as resources for collaborative meaning making and learning. International Journal of Computer-Supported Collaborative Learning, 19, 11–36. https://doi.org/10.1007/s11412-023-09413-0

Sockalingam, N., Lo, K., Teo, J., Cheah, C. W., Chow, D. J. J., Herremans, D., Lee, M. M. J., Kurniawan, O., Wang, Y., & Leong, P. K. (2025). Towards the future of education: Cyber-physical learning. Discover Education, 4, 82. https://doi.org/10.1007/s44217-025-00474-x

Stracke, C. M., Bothe, P., Adler, S., Heller, E. S., Deuchler, J., Pomino, J., & Wölfel, M. (2025). Immersive virtual reality in higher education: A systematic review of the scientific literature. Virtual Reality, 29, 64. https://doi.org/10.1007/s10055-025-01136-x

Suhail, N., Bahroun, Z., & Ahmed, V. (2024). Augmented reality in engineering education: Enhancing learning and application. Frontiers in Virtual Reality, 5, 1461145. https://doi.org/10.3389/frvir.2024.1461145

Supriyanto, S., Joshua, Q., Abdullah, A. G., Tetteh, E. O., & Ramdani, S. D. (2023). Application of augmented reality (AR) in vocational education: A systematic literature review. Jurnal Pendidikan Vokasi, 13(2). https://doi.org/10.21831/jpv.v13i2.54280

Teo, T., Unwin, S., Scherer, R., & Gardiner, V. (2021). Initial teacher training for twenty-first century skills in the Fourth Industrial Revolution (IR 4.0): A scoping review. Computers & Education, 170, 104223. https://doi.org/10.1016/j.compedu.2021.104223

Upadhyay, B., Brady, C., Madathil, K. C., Bertrand, J., McNeese, N. J., & Gramopadhye, A. (2024). Collaborative augmented reality in higher education: A systematic review of effectiveness, outcomes, and challenges. Applied Ergonomics, 121, 104360. https://doi.org/10.1016/j.apergo.2024.104360

Vidak, A., Movre Šapić, I., Mešić, V., & Gomzi, V. (2024). Augmented reality technology in teaching about physics: A systematic review of opportunities and challenges. European Journal of Physics, 45, 023002. https://doi.org/10.1088/1361-6404/ad0e84

Wong, E. Y.-C., Hui, R. T.-Y., & Kong, H. (2023). Perceived usefulness of, engagement with, and effectiveness of virtual reality environments in learning industrial operations: The moderating role of openness to experience. Virtual Reality, 27, 2149–2165. https://doi.org/10.1007/s10055-023-00793-0

Yang, C., Zhang, J., Hu, Y., Yang, X., Chen, M., Shan, M., & Li, L. (2024). The impact of virtual reality on practical skills for students in science and engineering education: A meta-analysis. International Journal of STEM Education, 11, Article 28. https://doi.org/10.1186/s40594-024-00487-2

Yu, H., & Wang, J. (2025). Enhancing college students’ creativity through virtual reality technology: A systematic literature review. Humanities and Social Sciences Communications, 12, Article 693. https://doi.org/10.1057/s41599-025-05044-y

Yuan, S., Huang, H., & Wu, L. (2025). Virtual reality and augmented reality in higher engineering education: A systematic literature review. Computer Applications in Engineering Education, 33(3), e70022. https://doi.org/10.1002/cae.70022

Zawacki-Richter, O., Marín, V. I., Bond, M., & Gouverneur, F. (2019). Systematic review of research on artificial intelligence applications in higher education—Where are the educators?. International Journal of Educational Technology in Higher Education, 16, Article 39. https://doi.org/10.1186/s41239-019-0171-0

Zontou, E., Kaminaris, S., & Rangoussi, M. (2024). On the role of virtual reality in engineering education: A systematic literature review of experimental research (2011–2022). European Journal of Engineering Education, 49(5), 856–888. https://doi.org/10.1080/03043797.2024.2369188

Published

2027-12-27

Issue

Section

Articles

How to Cite

Rahmadian, R., Ekohariadi, E., Suhartini, R., & Udhif Nofaizzi, M. (2027). Cross-Disciplinary Perceptions of Cyber-Physical and Immersive Learning in Vocational Higher Education: Implications for SDG 4. Journal of Current Studies in SDGs, 3(4), 342. https://doi.org/10.63230/jocsis.3.4.342